Panasonic KX-TDA100 Programming Manual page 545

Programming Manual References
None
Feature Guide References
None
Wireless XDP
Specifies the extension number of the PS with which Wireless XDP Parallel Mode is established. To
enable Wireless XDP Parallel Mode, the PS must be turned off once and then turned on after
assigning this setting.
When changing the port type of an extension port in DPT Type—Type (for DPT or S-Hybrid port)
on the 2.7.5 [1-1] Slot—Extension Port screen, the Wireless XDP setting must be deleted first.
Value Range
Max. 4 digits (consisting of 0–9)
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
1.25.5 Wireless XDP Parallel Mode
Ring Pattern Table
Specifies the Ring Tone Pattern Table to be used by the extension.
Value Range
1–8
Maintenance Console Location
2.10.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
2.8.14 [2-8-1] Ring Tone Patterns—Call from CO
2.8.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
2.8.16 [2-8-3] Ring Tone Patterns—Call from Others
Feature Guide References
1.1.3.2 Ring Tone Pattern Selection
Programmed Mailbox No.
Specifies the mailbox number of the extension's mailbox for Voice Processing Systems (VPS) with
DTMF Integration.
2.10 [4] Extension
PC Programming Manual 545