Dil Table & Port Setting [10-2] - Panasonic KX-TDA50 Features Manual

Feature Guide References
1.18.4 Display Information
Trunk Group Number
Specifies the CO line group number to which the CO line belongs.
Default
1
Value Range
1–64
Programming References
None
Feature Guide References
2.2.2 Group
4.16.2 DIL Table & Port Setting [10-2]
Direct In Line (DIL) can be selected for each CO line as the method of distributing incoming CO line calls to
certain destinations. For each CO line to which the DIL distribution is set, different destinations can be
programmed depending on the time mode (day/lunch/break/night). If desired, Calling Line Identification
(CLI) distribution can be used in conjunction with the DIL distribution.
TIE
For each CO line whose Trunk Property on this screen is Private (TIE), modification parameters for TIE
line call numbers can be programmed.
Slot
Indicates the slot position of each CO line card (reference only).
Default
Current slot number
Value Range
Slot number
Feature Guide References
None
Port
Indicates the port number (reference only).
4.16 CO & Incoming Call [10]
Feature Guide 629