Panasonic KX-TDA100 Programming Manual page 399

Feature Guide References
1.30.1 TIE Line Service
KX-T7710 (KX-TDA100/KX-TDA200/KX-TDA600 only)
The settings of the MESSAGE button and One-touch buttons on the KX-T7710 can be programmed.
Dial
Indicates the DTMF tone dial required by the PBX to recognise it and dial the preprogrammed number
for each button (reference only).
Value Range
B: For MESSAGE button
A1: For One-touch button 1
A2: For One-touch button 2
A3: For One-touch button 3
A4: For One-touch button 4
A5: For One-touch button 5
A6: For One-touch button 6
A7: For One-touch button 7
A8: For One-touch button 8
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Guide References
1.6.1.3 KX-T7710 One-touch Dialling
Message Key—Phone Number
Specifies the feature number or telephone number dialled when the MESSAGE button on the KX-
T7710 is pressed. By default, this is set to the feature number used to call back a caller who left a
message waiting indication, Message Waiting Set / Cancel / Call Back.
This is available only when the position of the Mode switch lever on the KX-T7710 is set to "PBX".
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
2.8.8 [2-6-1] Numbering Plan—Main—Features—Message Waiting Set / Cancel / Call Back
Feature Guide References
1.6.1.3 KX-T7710 One-touch Dialling
2.8 [2] System
PC Programming Manual 399