Panasonic KX-TDA100 Programming Manual page 162

2.7 [1] Configuration
ISDN CO / QSIG Master / QSIG Slave—T3D9
Specifies the length of time that the PBX tries to disconnect L2 in "Call by Call" mode.
Value Range
0–3000 × 100 ms
Maintenance Console Location
2.7.13 [1-1] Slot—BRI/PRI Card Property
Programming Manual References
None
Feature Guide References
None
ISDN Extension—T200
Specifies the maximum time that the PBX waits for a reply after sending the L2 command to ISDN.
Value Range
0–600 × 100 ms
Maintenance Console Location
2.7.13 [1-1] Slot—BRI/PRI Card Property
Programming Manual References
None
Feature Guide References
None
ISDN Extension—T201
Specifies the maximum time that the PBX waits for a reply after resending the TEI check request to
ISDN.
Value Range
0–600 × 100 ms
Maintenance Console Location
2.7.13 [1-1] Slot—BRI/PRI Card Property
Programming Manual References
None
Feature Guide References
None
162 PC Programming Manual