4-3] Dss Console-Flexible Button - Panasonic KX-TDA100 Programming Manual
Hybrid ip-pbx
Hide thumbs
Also See for KX-TDA100:
- Programming manual (912 pages) ,
- Pc programming manual (854 pages) ,
- Features manual (776 pages)
Table of Contents
Advertisement
2.10 [4] Extension
2.10.17 [4-3] DSS Console—Flexible Button
A DSS Console can be used in conjunction with a PT. A maximum of 4 (with the KX-TDA30), 8 (with
the KX-TDA100/KX-TDA200), or 64 (with the KX-TDA600) DSS Consoles can be programmed. The
DPT Type—Type (for DPT or S-Hybrid port) of the extension port that DSS Console is connected
must be set to DSS in 2.7.5 [1-1] Slot—Extension Port.
Each flexible DSS button can be customised to access a certain feature. A maximum of 66 flexible
DSS buttons can be customised for each DSS Console. Select the desired DSS Console from the
DSS Console No. list.
To copy DSS Console setting values from one location to another, click the Copy To button.
For more information on flexible buttons, see "1.20.2 Flexible Buttons" in the Feature Guide.
Pair Extension
Specifies the extension number of the PT to be used in pair with the DSS Console.
Note that with MPR Software File Version 3.1000 or later, if one or more SDN buttons have been set
at the DSS Console, they must be deleted before this setting can be changed.
Value Range
For KX-TDA30/KX-TDA100/KX-TDA200:
None, Max. 4 digits (consisting of 0–9)
For KX-TDA600:
None, Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.17 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Guide References
None
Type
Specifies the feature to be assigned to the flexible DSS button.
Value Range
Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/
DND (Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External),
Group Fwd (Internal), Account, Conference, Terminate, EFA, Charge, Call Park, Call Log, Log-in/Log-
out, Hurry-up, Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, ISDN
Service, CLIR, COLR, ISDN Hold, Headset, Time Service - Automatic/Manual, Check In, Check Out,
Two-way Record, Two-way Transfer, LCS, Voice Mail Transfer, NDSS, CTI, SDN (MPR Software File
Version 3.1000 or later)
Maintenance Console Location
2.10.17 [4-3] DSS Console—Flexible Button
658
PC Programming Manual
Advertisement
Table of Contents
