Panasonic KX-TDA100 Programming Manual page 312

2.7 [1] Configuration
Voice (RTP) UDP Port No. (IP-PT)
Specifies the UDP port used to transmit and receive RTP (Realtime Transfer Protocol) data on the IP-
PT side. This must be changed if another network application is using the same port.
For voice communications, an IP-PT uses 64 contiguous UDP ports, starting from the port number
specified here.
Value Range
1024–65472
Maintenance Console Location
2.7.37 [1-1] Slot—IP-Extension Card Property—Common Settings (KX-TDA100/KX-TDA200/KX-
TDA600 only) (MPR Software File Version 3.1000 or later)
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
312 PC Programming Manual