1-2] Portable Station - Panasonic KX-TDA100 Programming Manual

2.7 [1] Configuration

2.7.45 [1-2] Portable Station

Various portable station (PS) settings can be programmed. A maximum of 28 (with the KX-TDA30),
128 (with the KX-TDA100/KX-TDA200), 256 (with the KX-TDA600) or 512 (with the KX-TDA600 with
EMEC card installed) PSs can be registered.
Information on 32 PSs is displayed at a time. To display other PSs, click the applicable tab.
PS Registration and De-registration
A PS must be registered to the PBX by programming both the PBX and PS before it can be used.
Programming instructions of the PBX are given below; programming instructions of the PS are found
in the Installation Manual.
It is possible to de-register the PS later.
Registration
Follow the steps below to register the PS.
1.
Click Registration.
A dialog box will appear. Non-registered (available) extension numbers are displayed on the
left.
2.
Highlight numbers and click the right arrow to select them for registration. Click Next.
A screen will appear with information on the current PS extension number and index number
for programming.
3.
Register the relevant PS.
For details, refer to the Installation Manual.
KX-TDA30:
Registering DECT PS → 2.7.7 Connecting a Cell Station to the Hybrid IP-PBX
Registering 2.4 GHz PS → 2.8.7 Connecting a Cell Station to the Hybrid IP-PBX
KX-TDA100/KX-TDA200:
Registering DECT PS → 2.8.7 Connecting a Cell Station to the Hybrid IP-PBX
Registering 2.4 GHz PS → 2.9.7 Connecting a Cell Station to the Hybrid IP-PBX
KX-TDA600:
Registering DECT PS → 2.10.7 Connecting a Cell Station to the Hybrid IP-PBX
Registering 2.4 GHz PS → 2.11.7 Connecting a Cell Station to the Hybrid IP-PBX
4.
Click Next.
•
•
Once a PS is successfully registered, the status of the PS will update to show "Registered".
De-registration
Follow the steps below to de-register the PS.
1.
Click De-registration.
A dialog box will appear. Registered extension numbers are displayed on the left.
2.
Highlight numbers and click the right arrow to select them for de-registration. Click Next.
A dialog box will appear.
3.
Click Confirm.
334 PC Programming Manual
If the PS registration is still in progress, the dialog box will show "Waiting for portable
station to register...". Click OK.
If the registration is successful, the dialog box will show "Registration Succeed".
If there are more PSs to be registered, click Continue to resume. If not, click Close.