2.7 [1] Configuration
Value Range
64 × n (n=1–128) ms
Maintenance Console Location
2.7.25 [1-1] Slot—E1 Port
Programming Manual References
None
Feature Guide References
None
Start Signal Type
Selects the type of the start signal.
Value Range
Immediate: Sends the dialled digits to the trunk when the First Dial Timer expires.
Wink: Sends the dialled digits to the trunk when the wink signal is received.
Maintenance Console Location
2.7.25 [1-1] Slot—E1 Port
Programming Manual References
None
Feature Guide References
None
Sending Caller ID to TIE
Specifies whether Caller ID information is sent when Channel Type on this screen is set to E&M-P
or E&M-C.
Value Range
No, Yes
Maintenance Console Location
2.7.25 [1-1] Slot—E1 Port
Programming Manual References
None
Feature Guide References
None
268
PC Programming Manual