2-12] Ip Extension Settings (Kx-Tda100/Kx-Tda200/Kx-Tda600 Only) (Not Available For Mpr Software File Version 3.1000 Or Later) - Panasonic KX-TDA100 Programming Manual

2.8.21 [2-12] IP Extension Settings (KX-TDA100/KX-TDA200/KX-
TDA600 only) (not available for MPR Software File Version
3.1000 or later)
IP-PT network data transmission settings can be programmed. To activate any changes made to
settings on this screen, it is necessary to set all installed IP-EXT cards to OUS, then back to INS.
For MPR Software File Version 3.1000 or later, refer to 2.7.37 [1-1] Slot—IP-Extension Card
Property—Common Settings (KX-TDA100/KX-TDA200/KX-TDA600 only) (MPR Software File
Version 3.1000 or later).
Gateway Address
Specifies the default gateway address of the network for IP-PTs.
Value Range
0.0.0.0–223.255.255.255
Maintenance Console Location
2.8.21 [2-12] IP Extension Settings (KX-TDA100/KX-TDA200/KX-TDA600 only) (not available for
MPR Software File Version 3.1000 or later)
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Voice (RTP) UDP Port No. (Server)
Specifies the UDP port used by the IP-EXT card to transmit and receive RTP (Realtime Transfer
Protocol) data. This must be changed if another network application is using the same port.
For voice communications, an IP-EXT card uses 64 contiguous UDP ports, starting from the port
number specified here.
Value Range
1024–65472
Maintenance Console Location
2.8.21 [2-12] IP Extension Settings (KX-TDA100/KX-TDA200/KX-TDA600 only) (not available for
MPR Software File Version 3.1000 or later)
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
2.8 [2] System
PC Programming Manual 463