Panasonic KX-TDA100 Programming Manual page 277

Feature Guide References
None
Flash—Flash Detection
Enables the PBX to detect hookswitch flash signals.
Value Range
Disable, Enable
Maintenance Console Location
2.7.27 [1-1] Slot—E&M Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
Flash—Minimum BREAK Width
Specifies the minimum length of the break signal in a flash signal.
Value Range
8 × n (n=3–63) ms
Maintenance Console Location
2.7.27 [1-1] Slot—E&M Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
Flash—Flash Width
Specifies the maximum length of a hookswitch signal sent from an SLT that can be recognised by the
PBX as a flash signal.
Value Range
8 × n (n=3–191) ms
Maintenance Console Location
2.7.27 [1-1] Slot—E&M Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
2.7 [1] Configuration
PC Programming Manual 277