Table of Contents
Advertisement
How DRPD Responds to Calls
When there is an incoming call, the copier/fax checks the incoming ring pattern and
determines the type of pattern being received. The copier/fax may require up to 10
seconds to determine the pattern type. During this time, any telephone device
connected to the copier/fax reacts according to how you registered the setting.
Your Setting
TEL
FAX
FAX/TEL
AUTO SW
Communicating Using DRPD
Using the copier/fax with a DRP service is almost the same as using it with a normal
telephone line.
When you turn on DRPD, the receive mode defaults to DRPD.
When someone calls using the number assigned for telephone communication, the
copier/fax rings in the pattern you registered for voice calls. When you hear this pattern,
simply pick up the handset of the extension phone connected to the copier/fax and talk.
If you do not answer, the copier/fax continues to ring until the other party hangs up.
When someone sends a fax using the number assigned for fax communication, the
copier/fax receives the fax automatically.
Chapter 8
Incoming Call From Fax
Rings to alert you to pick up
the handset of the extension
phone. Press Start to receive
the fax (similar to MANUAL
MODE).
Receives the fax.
Switches to receive mode for
fax transmission signals.
Incoming Call From Telephone
Rings to alert you to pick up the
handset of the extension phone
and take the call.
Answers as a fax machine.
Rings to alert you to pick up the
handset of the extension phone
and take the call.
Receiving Faxes
8-13
Advertisement
Table of Contents
