Table of Contents
Advertisement
Periodic Cleaning
Your copier/fax requires little periodic maintenance. This section describes the
necessary cleaning procedures for your copier/fax. Please note the following before
cleaning your unit:
• Be sure to disconnect the power cord before cleaning the copier/fax. Since
documents in memory are erased when the power is disconnected, print any
documents stored in memory before disconnecting the power cord. (1 p. 7-15)
• Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick
to the components or generate static charges.
c
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical
cleaner to clean the interior of the copier/fax; these can damage the copier/fax
components.
Cleaning the Copier/Fax's Exterior
Follow this procedure to clean the unit's outer casing:
1
Disconnect the power cord from the
copier/fax.
2
Wipe the unit's exterior with a clean, soft,
lint-free cloth moistened with water or
diluted dishwashing detergent solution.
3
When you are finished, reconnect the power
cord.
Cleaning the Copier/Fax's Interior
Cleaning Inside the ADF (Automatic Document Feeder)
To prevent ink spots and paper dust from accumulating inside the copier/fax and
affecting print quality, clean the unit's print area periodically.
Follow this procedure to clean inside the copier/fax:
1
Disconnect the power cord from the
copier/fax.
12-2
Maintenance
Chapter 12
Advertisement
Table of Contents
