Rx (Reception) Settings Menu - Canon B740 Manual

RX (Reception) Settings Menu

For details on accessing the settings below, see p. 14-2.
Setting
ECM RX
RX MODE
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
F/T RING TIME
REMOTE RX
REMOTE RX ID
MEMORY RX
COLOR RX
* Even if you have set INCOMING RING to ON, the copier/fax will only ring if you have connected an extension
phone to your unit.
14-6
Summary of Settings
Description
Enables/disables Error Correction Mode (ECM) during
reception.
Selects the receive mode. (1 Chapter 8, Receiving
Faxes)
If you select FAX/TEL AUTO SW or DRPD, you can
select additional sub-settings. (1 pp. 8-4, 8-10)
When the copier/fax is set to FAX ONLY MODE or
FAX/TEL AUTO SW, enables/disables ringing when
the copier/fax receives a call.*
Selects the number of incoming rings before the
copier/fax answers.
When the copier/fax is set to MANUAL MODE,
determines if the copier/fax switches to fax receive
mode after it rings for a specified time.
If you select ON above, selects the length of time the
copier/fax rings before switching to fax receive mode.
Enables/disables remote receiving.
If you select ON above, selects the remote receiving ID.
Enables/disables memory reception of a document (e.g.
when an error occurs).
Enables/disables color fax reception. (1 p. 8-14)
Sub-Settings
ON/OFF
FAX/TEL AUTO
FAX ONLY MODE/
OFF/ON
2 TIMES
(1 to 99)
OFF/ON
15 SEC
(1 to 99)
ON/OFF
(00 to 99)
ON/OFF
ON/OFF
(Default settings are shown in bold type.)
SW/
DRPD
25
Chapter 14