Using Coded Speed Dialing - Canon B740 Manual

Using Coded Speed Dialing

To use this feature, you must first register a number for coded speed dialing. (1 p. 6-6)
Follow this procedure to send documents using coded speed dialing:
1
Adjust the document feed lever for the
document you are loading. (2 p. 4-2)
2
Prepare the document and load it, face
down, in the ADF (Automatic Document
Feeder). (2 p. 4-3)
• For color sending, press Color/B&W to
turn on its light. (1 p. 7-2)
• To adjust the resolution and contrast,
see pp. 7-2, 7-4.
Coded Dial
3
Press
4
Use the numeric buttons to enter the two-digit
code assigned to the number you wish to fax.
• The number registered under that coded speed
dialing code is displayed.
• If you enter the wrong code, press Stop. Then
press Coded Dial and enter the correct code.
• If no fax number is assigned to the coded
speed dialing code you enter, the LCD
displays NO TEL #. If this happens, make
sure you entered the correct code and that
the number you want to dial is registered
under that code.
5
Press
or wait a few seconds for the copier/fax to
begin scanning automatically.
• If you prefer the copier/fax never to scan a
document automatically after a few seconds,
disable the TIME OUT setting. (1 p. 14-5)
n
You can also use coded speed dialing to send a document to more than one destination at
a time. (1 Sequential Broadcasting, p. 7-13)
6-8
Speed Dialing
.
Start
to begin scanning for sending,
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
A
Ex:
A01
Ex:
TEL=03 3758 2111
Chapter 6