Table of Contents
Advertisement
2
Lift the document guides to open the
ADF (Automatic Document Feeder).
• If it does not open easily, slide the
document guides outward and then open
the ADF (Automatic Document Feeder).
Alternatively, set the document feed lever to
a automatic document feed.
c
Do not touch the components
shown or any metal parts since this
may adversely affect operation of
the unit and/or affect print quality.
3
Use a clean, soft, dry, lint-free cloth to
remove any ink or paper debris from
the unit's interior (shaded area),
especially around the platen.
• Be careful not to touch the BJ cartridge or
its holder.
4
Check the small black rollers. If they
are dirty, clean them with a soft, dry
toothbrush.
5
When you are finished, close the ADF
(Automatic Document Feeder).
6
Reconnect the power cord.
Chapter 12
DOCUMENT GUIDES
ROUND SHAFT
RIBBON CABLE
GUIDE RAIL
Maintenance
12-3
Advertisement
Table of Contents
