Table of Contents
Advertisement
Message
NOT AVAILABLE
PLEASE WAIT
PUT IN CARTRIDGE
REC'D IN MEMORY
START AGAIN
TRY AGAIN IN B&W
TX/RX CANCELLED
TX/RX NO. nnnn
Chapter 13
Error Code Cause
#025
In manual sending, you
entered a speed dialing
number that is assigned
to a group.
—
The unit is warming up.
—
The BJ cartridge is not
installed correctly.
The BJ cartridge is not
installed.
—
The unit received the fax
in memory because
paper or ink ran out, a
paper jam occurred, or
the incorrect BJ cartridge
was installed.
—
An error has occurred in
the telephone line or in
the system.
#085
You tried sending a color
document to a fax
machine that does not
support color faxing.
—
You pressed Stop to
cancel the transmission.
—
When the unit sends or
receives a fax, it assigns
it a unique identification
number (nnnn).
Action
Use regular dialing, or
enter a one-touch speed
dialing button or coded
speed dialing code that
only has one fax/telephone
number registered.
Wait until the date and
receive mode appear in the
LCD, then start your
operation.
Make sure the BJ cartridge
is installed correctly and
that the blue cartridge lock
lever is down. (1 p. 2-12)
Install a BJ cartridge.
(1 p. 2-12)
Load paper in the multi-
purpose tray (1 p. 2-15),
replace the BJ cartridge or
tank(s) (1 pp. 12-11,
12-14), clear the paper jam
(1 p. 13-4), or install the
correct BJ cartridge.
(1 p. 12-11)
Start the procedure again
from the beginning.
Try sending again in black
& white (1 p. 7-2).
Alternatively, enable the
COLOR DIRECT TX setting.
(1 p. 14-5)
If required, try sending
again.
Write the number down if
you will need it later.
13-11
Troubleshooting
Advertisement
Table of Contents
