Receiving Both Faxes And Telephone Calls Automatically: Fax/Tel Mode; Setting Up Fax/Tel Mode - Canon FAX-L280 User Manual

Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode
Set this mode if you only have one telephone line for fax and telephone
use and want your FAX to automatically switch between fax and voice
calls.
For this mode, you need to connect the optional handset or a telephone to
your FAX (

Setting Up Fax/Tel Mode

Follow this procedure to set the receive mode to FAX/TEL AUTO SW
(Fax/Tel Mode):
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set.
4
Use
5
Press Set.
6
Use
7
Press Set.
8
Use
SW.
9
Press Set.
To set the options for FAX/TEL
AUTO SW (Fax/Tel Mode), see the
following pages.
10
Press Stop to return to standby mode.
11
Confirm that FaxTel is displayed in the
LCD.
If FaxTel is not displayed, press
Receive Mode to select Fax/Tel
Mode. After a few seconds, the LCD
returns to standby mode.
Chapter 8
p. 2-6).
or to select RX SETTINGS.
. .
or to select RX MODE.
. .
or to select FAX/TEL AUTO
. .
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX ONLY MODE
FAX/TEL AUTO SW
RING START TIME
Ex:
15:00 FaxTel
Ex:
15:00 FaxTel
Receiving Faxes
8-5