Setting The Receive Mode; Receiving Faxes And Phone Calls Automatically: Fax/Tel Mode; Setting Up Fax/Tel Mode - Canon FAX-L360 User Manual

Setting the Receive Mode

Set the FAX-L360 receive mode as follows:
1. Press Receive Mode
Receive Mode
❏ The LCD display shows the current receive mode setting.
2. If you want to change the receive mode, press Receive Mode until the mode
you want appears.
Receive Mode
Receiving Faxes and Phone Calls Automatically:
Fax/Tel Mode
Set this mode if you want your FAX-L360 to automatically switch between voice
and fax calls.
You can control precisely how your FAX-L360 handles incoming calls by adjusting
the settings described below.

Setting Up Fax/Tel Mode

When you select Fax/Tel Mode from the Data Registration menu, you can also set
the following options.
❏ RING START TIME
When a call comes in, the unit checks to see if it is a person wishing to speak to
you or a fax machine trying to send a document. If your unit does not have
enough time to detect the fax tone, it assumes the call is from a telephone. Use
the RING START TIME setting to increase the time the unit takes to check
whether a call is from a fax machine or a telephone. You can select a time
between 0 and 30 seconds; the default is 8 seconds.
Chapter 7 Receiving Faxes 7-5