Receiving Faxes Automatically: Faxonly Mode; Using An Answering Machine: Ansmode; Using The Machine With An Answering Machine; Receiving With A Drpd (Distinctive Ring Pattern Detection) Service: Drpd - Canon FaxPhone L170 Basic Manual

Canon faxphone l170: basic guide
Hide thumbs Also See for FaxPhone L170:
Table of Contents

Advertisement

The machine then begins receiving the document. (This is particularly convenient if your telephone is located away from the machine.)
If you do not hang up after pressing [Start] or the two-digit ID code, the machine beeps intermittently after you receive the document.
(You can turn the beeping off by disabling the <OFFHOOK ALARM> in the <USER SETTINGS> menu. See p. 15-7 for details.)
NOTE
If you have an answering machine connected to your machine that can carry out remote-control operations (controlling your answering
machine from a remote telephone), the security code for this function may be the same as the two-digit ID code described above. If so,
make sure you change the machine two-digit ID code to make it distinct from the answering machine's security code. See p. 15-11 for
details on changing the code (<REMOTE RX ID> setting).

Receiving Faxes Automatically: FaxOnly Mode

When the machine is set up for a dedicated line, set FaxOnly Mode to automatically receive documents whenever a call
comes over the fax line.
The machine assumes all incoming calls are from fax machines sending documents. It receives the documents
automatically and disconnects all voice calls.
In FaxOnly Mode, you can control whether or not the machine rings when it receives a fax call. To set this option from the
machine operation panel, see p. 15-10 (<INCOMING RING> setting).

Using an Answering Machine: AnsMode

Connecting an answering machine to the machine allows you to receive faxes and phone messages while you are out of
the office.

Using the Machine With an Answering Machine

Follow these guidelines when using the machine with an answering machine:
Set the answering machine to answer on the first or second ring.
If the machine runs out of paper or toner in AnsMode, it receives all faxes into memory. The faxes then print automatically
when you add paper or replace the toner cartridge.
When recording the outgoing message on the answering machine:
- The entire message must be no more than 15 seconds long.
- In the message, tell your callers how to send a fax. For example:
"Hello. I can't answer the phone right now. If you would like to send a fax, press the start button on your fax machine. Thank
you."
Receiving with a DRPD (Distinctive Ring Pattern Detection)
service: DRPD
DRPD service assigns two or more telephone numbers with distinctive ring patterns to a single telephone line, allowing you
to have both a fax number(s) and a telephone number(s) using only one telephone line. Your fax will automatically monitor
incoming calls and based on the ring pattern, will let you know if the call is a fax or voice call. Set the fax ring pattern that
matches the pattern assigned by your telephone company.
NOTE
Contact your local telephone company for detailed information on this service.
Different Ways to Receive a Fax
7
7-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents