Detecting Video Loss - Interlogix TruVision DVR 12 User Manual

Input/output Video Standards Mismatch: I/O video standards do not
•
match.
Abnormal Record: Recording failed due to encoder or hard disk problems.
•
See "Description of alarm notification types" on page 25 for information on the
different alarm notification types available.
To set up system notifications:
1. From the menu toolbar, click
2. Select a notification type.
3. Check one or more response options: Audible warning, notify surveillance
center, send email, and trigger alarm output.
4. Repeat steps 2 and 3 for other notification types.
5. Click to save the settings.
Apply

Detecting video loss

Video may be lost if the video cable or camera develop a fault or are damaged.
You can set up the DVR to detect video loss and trigger a system notification.
To setup video loss detection:
1. From the menu toolbar, click
2. Select a camera to configure for video loss detection.
3. Check the
Enable Video Loss Alarm
4. Click next to the Video Loss Detection box to enter the Rules window.
Rules
5. Click the tab and select how you want the DVR to notify you of video
Rule
loss (see page 25 for the list of options). Click
then clock to return to the previous window.
OK
6. Click the
Arming Schedule
video loss detection to be enabled. Schedule can be set for all week or any
day of the week with up to 8 time periods per day.
7. Click the
Apply
8. Click to copy these settings to other cameras.
Copy
9. Click to return to live view.
Back
TruVision DVR 12 User Manual
Alarm Settings
Camera Management
tab and select the schedule of when you want
button to save settings.
> Notification.
>
Video
box to enable the feature.
to save the settings and
Apply
Chapter 5: Alarm settings
Loss.
31