Table of Contents
Advertisement
Remote Operation from Browser
Connecting to MobileView 3000
To access the DVR from a direct attached computer, perform the following steps.
1. Connect a network cable between the DVR front Ethernet port and computers
wired Ethernet port
2. Set the computer IP address to the 192.168.0.x network
3. Open Internet Explorer 7, 8, or 9 (these are the only supported versions)
4. Set the URL to "192.168.0.100" and press ENTER
5. When prompted, enter credential information
Default User: admin
Default Pass: 11111111
6. Upon pressing enter, the DVR landing page showing live video will appear.
Figure 7: Main Page
Main Home Page
The Main page provides access to the following configuration pages:
18
MobileView 3000 User Manual
Advertisement
Table of Contents
