Duplex Front Flap Removal - Lexmark MX81 series Service Manual

•
"Sensor (duplex path) removal" on page 364
•
"Sensor (tray 1 media out) removal" on page 365
•
"Separator roller assembly removal" on page 367
•
"Right frame extension (MX71x)" on page 367
•
"Right frame extension removal (MX81x)" on page 369

Duplex front flap removal

Warning—Potential Damage: When removing the duplex front flap, ensure that you retain the attached spring.
1
Disconnect the machine from any input options.
2
Carefully place the machine on its rear side so that the bottom of the machine is exposed, as shown in the following
image.
CAUTION—POTENTIAL INJURY: Remove all data cables and the power cord from the back of the printer
before you place it on its rear side. Otherwise, the weight of the printer will be on these cables.
Repair information
356
7463