Lexmark MX81 series Service Manual page 423

7
Remove the sensor (standard bin full) with actuator. See
8
Remove the standard bin cover. See
9
Remove the control panel. See
10
Disconnect the right recoil spring.
11
Remove the controller board access shield. See
12
Disconnect the control panel ribbon cable (A) from the controller board.
."Standard bin cover removal (MX71x)" on page
"Control panel removal (MX71x)" on page
"Controller board access shield removal" on page
Repair information
421
"Sensor (standard bin full) removal" on page
399.
7463
349.
350.
374.