Mailbox Option Removals; Mailbox Assembly Removal; Mailbox Top Cover Removal - Lexmark MX81 series Service Manual

Hide thumbs Also See for MX81 series:

Table of Contents

Remove the two screws (D) securing the limit switch.

Disconnect the cable (J7) from the controller PCBA.

Route the cable off the stapler, and remove the stapler door close limit switch.

Note: Pay attention to the original routing of the cables.

Mailbox option removals

Press the latches to release, and lift the mailbox assembly off the printer.

Lift the top cover, and remove from the mailbox assembly.

Repair information