Lexmark MX81 series Service Manual page 58

9
Close the multipurpose feeder door and the front cover.
10
To clear the message and continue printing, select Next >
200‑201 paper jams
Error code Description
200.01 Media remains on the sensor (input) during
the warm‑up sequence.
200.02 Media reached the sensor (input) sooner
than the specified time. The wrong config ID
causes the engine to assume a 550 paper
path on a 250 model.
200.03 Media is late reaching the sensor (input)
within the specified time.
200.05 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = MPF tray)
200.07 Media reached the sensor (input) but did not
clear it within the specified time.
200.08 Media is late reaching the sensor (input)
within the specified time.
200.09 The proper main motor feedback to start
laser servo was not received.
200.10 Printhead motor was not locked when page
reached the sensor (input).
200.11 Printhead motor fell out of lock after the
page reached the sensor (input).
200.12 Printhead was not ready for the page when
the sensor (input) was reached.
> Clear the jam, press OK >
Action
See "Sensor (input) static jam service check" on page
See "Sensor (input) early arriving jam service check" on
page 58.
See "Sensor (input) never‑ or late‑arriving jam service check"
on page 59.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 61.
See "Sensor (input) late-leaving or did-not-clear jam service
check" on page 61.
See "Sensor (input) never‑ or late‑arriving jam service check"
on page 59.
See "Main drive motor control jam service check" on page
62.
See "Printhead motor control jam service check" on page
63.
See "Printhead motor control jam service check" on page
63.
See "Printhead motor control jam service check" on page
63.
Diagnostic information
56
7463
.
58.