Fuser Drive Motor Service Check; Fuser Service Check - Lexmark MX81 series Service Manual

Fuser drive motor service check

Action
Step 1
Ensure the cable for socket "J24" on the controller board is properly
connected.
Is the above connection properly connected?
Step 2
Reset the machine.
Does the error continue?
Step 3
Reset the machine.
Does the error continue?

Fuser service check

Action
Step 1
Ensure the fuser is properly installed.
Is the fuser properly installed?
Step 2
Remove the existing fuser and install a different fuser.
Does the error remain?
Step 3
Ensure the cable for socket "J27" on the controller board is properly
connected.
Is the above connection properly connected?
Step 4
Ensure the LVPS connections are properly connected.
Are the above connections properly connected?
Step 5
Reset the machine.
Does the error remain?
Yes
Go to step 2.
Replace the fuser drive
motor. See
drive motor removal"
on page
Go to step 3.
Replace the controller
board. See
board removal" on
page
Yes
Go to step 2.
Replace the fuser. See
"Fuser removal" on
page
Go to step 3.
Go to step 4.
Go to step 5.
Replace the LVPS. See
"LVPS removal" on
page
Go to step 6.
Diagnostic information
110
No
Reseat the
connections.
Go to step 2.
Problem resolved.
"Fuser
374.
Problem resolved.
"Controller
372.
No
Reseat the
connections.
Go to step 2.
Problem resolved.
340.
Reseat the connection.
Reseat the
connections.
Problem resolved.
389.
7463