3
Pinch the snaps on the JICC1 and JADF1 cable router to release the cable router.
4
Open the ADF, and then lift to detach the ADF from the flatbed scanner.
ADF bottom door removal
1
Remove the ADF front cover. See
2
Remove the ADF rear cover. See
3
Remove the flatbed glass cushion. See
4
Disconnect the JBCON1 connector on the ADF controller card.
"ADF front cover removal" on page
"ADF rear cover removal" on page
"Flatbed glass cushion removal" on page
Repair information
433
443.
454.
483.
7463