Lexmark MX81 series Service Manual page 101

Error Description
code
32.12 Fuser smart chip compatibility error
33.xx Non‑license return program (NLRP) supply installers
34.xx Media size mismatch—the printer detects the media as too
short or too narrow
35.xx Res save off deficient memory—the printer lacks sufficient
memory to enable Resource Save
37.xx Insufficient collation area
38.xx Memory full
39 Complex page—the page is too complex to print
41 Cartridge/imaging unit type mismatch
Diagnostic information
99
Action
Replace the fuser. See "Fuser removal" on
page 340.
Replace non‑licensed supply with properly
licensed supply.
Do the following:
•
Make sure that the media loaded is in the
proper size. The print job settings must also
coincide with the size of the media being
printed on.
•
Make sure that the media tray guides are
properly set.
Try one or more of the following:
•
From the printer control panel, press
Continue to disable Resource Save, clear
the message, and continue printing.
•
Install additional memory.
Try one or more of the following:
•
From the printer control panel, select
Continue to stop the defragmentation and
continue printing. For non‑touch‑screen
printer models, press OK to confirm.
•
Delete fonts, macros, and other data from
the printer memory.
•
Install additional printer memory.
Try one or more of the following:
•
From the printer control panel, press
Continue to disable Resource Save, clear
the message, and continue printing.
•
Install additional memory.
Try one or more of the following:
•
From the printer control panel, press
Continue to clear the message.
•
Decrease the resolution setting.
•
Install additional printer memory.
Install properly regioned supply.
7463