Sensor (Hcit Pick) Removal - Lexmark MX81 series Service Manual

6
Disconnect the cable (B), and remove the sensor (roller position).

Sensor (HCIT pick) removal

1
Remove the HCIT. See
2
Remove the drawer assembly rear cover. See
3
Remove the drawer assembly left cover. See
4
Remove the top cover assembly. See
"HCIT removal" on page
"HCIT drawer assembly rear cover removal" on page
"HCIT drawer assembly left cover removal" on page
"HCIT top cover assembly removal" on page
Repair information
555.
570
559.
559.
562.
7463