Horizontal Voids Appear On Prints - Lexmark MX81 series Service Manual

Hide thumbs Also See for MX81 series:
Table of Contents

Advertisement

Actions
Step 1
Ensure the toner cartridge has sufficient toner.
Does the cartridge have sufficient toner?
Step 2
Remove any contamination from the CTLS contacts, located on the toner
level/imaging unit high voltage contact. Perform a print test.
Does the problem remain?
Step 3
Check the CTLS, located on the toner level/imaging unit high voltage
contact, for damage.
Is it free of damage?
Step 4
Check the transfer roller for surface contamination or excessive wear.
Is it free of contamination and wear?
Step 5
Check the transfer roller left contact spring, located on the transfer roller
left arm, for damage.
Is it free of damage?

Horizontal voids appear on prints

Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
Contact the next
highest level of
support.
Diagnostic information
39
7463
No
Replace the toner
cartridge.
Problem is solved.
Replace the toner
level/imaging unit high
voltage contact.
Replace the transfer
roller.
Replace the transfer
roller left arm. See
"Transfer roller left
arm with cable
removal" on page
332.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx71 series

Table of Contents