Power Switch Removal - Lexmark MX81 series Service Manual

Installation notes:
•
When replacing the LVPS, ensure that all connections are replaced.
•
When replacing the LVPS, ensure that the connector pins (D) properly engage the controller board.

Power switch removal

1
Remove the rear lower cover. See
2
Remove the right cover. See
3
Remove the right frame extension. See
4
Disconnect the main power cable (A) from the LVPS.
"Rear lower cover removal" on page
"Right cover removal (MX71x)" on page
"Right frame extension removal (MX81x)" on page
Repair information
392
304.
306.
369.
7463