Programming The Foot Control; Programming Securing Stitches; Automatic Thread Cutter; Raising The Presser Foot - Bernina 880 Manual

Setup-Program
1
3
5
2
56
4
6
034791.51.04_2014-02_Manual_B880_EN

Programming the foot control

⦁ touch the «Foot control»-icon
Standard = icon 1 is activated.
⦁ back heel kick in the foot control
►
the needle is raised or lowered
⦁ touch icon 2

Programming securing stitches

►
when the icon 3 is activated, the number and type of securing stitches can
be programmed via back-heel-kick on the foot control
►
Standard = four securing stitches at the place
⦁ touch icon 4 for securing stitches forward
⦁ using the «+»/«-»-icons two up to six securing stitches can be programmed

Automatic thread cutter

►
with icon 5 activated, the upper and the lower thread are cut automatically
by back heel kick
►
is the icon deactivated, the threads cannot be cut

Raising the presser foot

►
with the icon 6 activated, the presser foot is raised by back heel kicking
►
is the icon deactivated, the presser foot remains down