Presser Foot Lifter; Pivotable Triple Spool Holder - Bernina 880 Manual

Presser foot lifter

Pivotable Triple Spool Holder

Raising or lowering presser foot via FHS.
Attaching the Free Hand System
1
⦁
Raising and lowering the presser foot
⦁
⦁
►
►
⦁
⦁
⦁
►
►
1
034791.51.04_2014-02_Manual_B880_EN
insert into the opening 1
with your knee, push lever to the right
you should be able to operate the FHS with your knee in your normal sitting
position
the presser foot is raised; the feed dog is lowered simultaneously. The
thread tension is released
the feed dog is raised as soon as the first stitch is sewn
Your dealer can adjust the FHS if necessary.
remove spool-pin cover vertically upwards
pull up the telescopic rod and ensure that all the parts snap into place
swing spool pin to the right until it is engaged
this ensures a good overall view and access to the spool pins
eyelet 1 is used when winding a bobbin
Sewing preparation
21