End Of Embroidery; Embroidering Via Foot Control; Interrupting The Process; Completing The Color - Bernina 880 Manual

Motifs
1

Embroidering via foot control

200

End of embroidery

⦁ after completing the motif touch the icon 1 to finish the embroidery process,
or touch the «Endless Embroidery»-icon 2 again to repeat the border
embroidery
2
When embroidering via the foot control always keep it depressed.
⦁
press the foot control
►
the embroidery computer sews approximately 7 stitches and stops
automatically
►
a Display indicates that the thread tail has to be cut at the beginning of the
motif
⦁ release the foot control
⦁ raise the presser foot
⦁ cut the thread tail at the beginning of the embroidery
⦁ press the foot control and keep embroidering

Interrupting the process

⦁ release the foot control
►
the embroidery computer stops

Completing the color

⦁
press the foot control
►
the embroidery computer embroiders all the sections in the color activated
►
the embroidery computer stops automatically when complete
►
both threads are automatically cut

Color change

►
the emboidery computer switches automatically to the next color
⦁
change color of the upper thread accordingly
⦁ embroider with the new color
«Embroidery»-Display
►
after starting the motif the «Embroidery»-Display appears
Embroidering via the foot control is recommended for a small
sequence.
034791.51.04_2014-02_Manual_B880_EN