Changing The Needle; Removing The Needle; Inserting The Needle - Bernina 880 Manual

Changing the needle

Removing the needle

⦁
⦁
⦁
1
⦁
⦁

Inserting the needle

⦁
⦁
1
⦁
034791.51.04_2014-02_Manual_B880_EN
raise the needle
remove or lower presser foot (see page 27, 39)
turn power switch to «0» (off)
loosen the needle clamp screw 1 using the gray screwdriver
pull the needle down to remove
flat side of needle to the back
insert the needle with the mulitfunction tool as far as it will go
tighten needle clamp 1 using the gray screwdriver
Sewing preparation
25