Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Bernina 8 SERIES V29.39.00
Summary of Contents for Bernina 8 SERIES V29.39.00
-
Page 2: Table Of Contents
2.13 Pattern #169 improved 2.14 Tension changed for the “tie on” stitches 2.15 Upper thread detection changed 3 Embroidery Updates (BERNINA 830 only) 3.1 Start of embroidery 3.2 Using zoom option with panning 3.3 Using Foot #44C (The new CutWork & Echo quilting foot) 3.4 Thread tension can be changed to a minimum of 0.5... -
Page 3: Software Version
SoftwARE VERSIoN The Release Note V29.39.00 is in addition to the Release Note V29.21.40 (6/2009). The newest firmware version for: Sewing machine Firmware BERNINA 830 V 29.39.00 BERNINA 820 V 29.39.00 1 GENERAl ChANGES 1.1 Language “Finnish” integrated The following languages are now integrated: Danish, German, English, Spanish, French, Italian, Japanese, Dutch, Russian, Swedish, Turkish and Finnish. -
Page 4: Sewing Updates
2 SEwING UpdAtES 2.1 Thread tension for the underlay segments (buttonholes) To eliminate possible thread loops, the thread tension for segments with short step stitches is inc- reased from 2.0 to 3.0. 2.2 Manual threading In some cases during manual threading, the thread swing support mechanism can be blocked. This update avoids this issue without performing any mechanical readjustments. -
Page 5: The Use Of Straight Stitch Feet With Thread Cutting
2.3 The use of straight stitch feet with thread cutting The opening of the straight stitch foot is 0.4mm on both sides. The “tie on” stitch after cutting is 0.4mm to the left side. After thread cutting, the first stitch failed resulting in the animation “need- le will penetrate presser foot”... -
Page 6: Winding Indicator During Sewing/Embroidery
In addition to the “automatic” mode, an extended manual mode is implemented. This mode gives the user the opportunity to start and stop the winding process by holding and releasing the winding button. 2.7 Winding indicator during sewing/embroidery When closing the winder menu during winding, the clock symbol changes to the winding symbol and allows switching back to the winding menu. -
Page 7: Thread Breakage Hint
2.9 Thread breakage hint If the thread breaks, press the threading button to open the thread tension and remove the th- read. Rethread the normal way. 2.10 Problem with Foot #57D and straight stitch compatibility Select stitch #1, attach and select the foot #57D (Patchworkfoot with guide). Open the securing function and select the straight stitch plate. -
Page 8: Presser Foot #0 Can Be Used For Automatic Threading. With The "Walking Foot" Automatic Threading Is Not Possible
2.11 Presser Foot #0 can be used for automatic threading. With the “Walking foot” automatic threading is not possible The original help text mentioned that the machine cannot be threaded automatically with foot attached. New help text implemented: 2.12 Information Foot #2a corrected Data correction of the dimensions of the presser foot sole. -
Page 9: Pattern #169 Improved
2.13 Pattern #169 improved Elongation limited to a maximum value of two for optimal results. 2.14 Tension changed for the “tie on” stitches To improve the “tie on” quality with stretchy threads, such as polyester, monofilament etc. the tension setting for the first four stitches is reduced. 2.15 Upper thread detection changed To prevent an inaccurate warning messages from the upper thread detection, if the thread tensi- on is detected not to be correct the machine now stops after eight stitches. -
Page 10: Embroidery Updates (Bernina 830 Only)
3 EmBRoIdERy UpdAtES (BERNINA 830 oNly) 3.1 Start of embroidery If the Start button was pressed while the bobbin door was open, either the embroidery start was not possible or the start position was incorrect. This has been resolved. 3.2 Using zoom option with panning When using the zoom option, only the view of the design will be moved. -
Page 11: Thread Tension Can Be Changed To A Minimum Of
3.4 Thread tension can be changed to a minimum of 0.5 A new parameter controls the minimum thread tension range (between 0.0 - 1.0) In the embroidery mode, the thread tension can be lowered to a minimum level of 0.5, instead of 1.0. When decreasing the tension values to less than 1 a warning message appears. -
Page 12: Stop For Manual Cutting Can Be Switched Off
3.5 Stop for manual cutting can be switched off Deselecting of the scissor symbol, will disengage the stop sequence for manual cutting at the beginning of a design or color. 3.6 Manual “tie on” for embroidery Disabling of the “tie on” button will disengage the automatic tie on. User brings up the lower thread manually and during the first stitches the thread must be held. -
Page 13: Delay Of Start/Stop Button Reduced For Embroidery
As is in sewing mode (in setup), the selected “no thread” mode will be displayed. 4 ImpoRtANt poINtS 4.1 Hoop calibration Calibration of hoops has to be done after updating the BERNINA 830. 4.2 Feedback issues Please inform BERNINA (standard information way) about any unusual crashes, error messages and malfunction in form of a log file.