Functions
Functions
Overview «Function»-buttons
«Start/Stop/hover»-button
̶ starts and stops the sewing computer when
operating with or without foot control
̶ starts and stops the BSR-Function if the BSR
foot is attached and activated
̶ raise the presser foot slightly quick press while
sewing to pivot or move the sewing work
«Quick reverse»/«Permanent reverse sewing»-
button
̶ secures the seam beginning and end: sews in
reverse as long as the button is pressed
̶ used to program the buttonhole length
̶ used to program the darning length
̶ used to determine end of stitching in straight
stitch Securing Stitch No. 5
̶ used for securing in Quilters securing program
No. 1324
Slide speed control
̶ the sewing and embroidering speed is infinitely
variable with the slide
38
034791.51.04_2014-02_Manual_B880_EN
ATTENTION!
The «Automatic threader»-button mustn't be
activated with one of these presser feet attached
nos. 48, 50, 55, 85, 86, 93 and the cut'n'sew No. 80.
«Automatic threader»-button
⦁
touch button = finishes the threading process
and threads the needle
Double, triple and wing needles require manual
threading after the button has been pressed.
Use the «Automatic needle threader»-button for needle
sizes 70-120. Metallic threads, thick threads like
cordonnet and difficult to work with threads should be
threaded by hand.
Programmable «Pattern end-/Securing»-button
⦁
press button before or during sewing
►
single pattern is secured at the end, with the
selected number of stitches programmed
⦁
press button before or during sewing of a
combination
►
the active pattern of the combination is
secured at the end, with the selected number
of stitches programmed
⦁
the number and type of the securing stitches
can be programmed in the Setup-Program
►
a stop symbol which appears during sewing
indicates that the function is activated