Needle Stop»-Button; Automatic Securing Program»-Button; Presser Foot Position»-Button; Automatic Thread Cutter»-Button - Bernina 880 Manual

«Needle stop»-button
⦁
press the button
►
the needle is raised or lowered in the same
way as by sinking the heel back on the foot
control
«Automatic Securing Program»-button
⦁
press the button before sewing start = the
individual pattern/combination is secured at
the beginning with the number of programmed
stitches
⦁ keep the button pressed while sewing = the
sewing computer stops at once and sews the
number of programmed stitches
⦁ the number and type of the securing stitches
can be programmed in the Setup-Program
«Presser foot position»-button
⦁ press the button
►
the presser foot is lowered and raised a bit
again for easy positioning of the material
►
the presser foot is lowered on the fabric when
start sewing
⦁
press the button again
►
the foot is raised and the feed dog is lowered
simultaneously
«Automatic thread cutter»-button
̶ the upper and the lower threads are cut
automatically
̶ 2-6 securing stitches can be programmed in
the Setup-Program. These are sewn before
the thread is cut
034791.51.04_2014-02_Manual_B880_EN
Functions
Stitch width and Stitch length Knobs
(Multifunction)
̶ to adjust stitch width or stitch length
̶ to alter thread tension
̶ to set the buttonhole slit width or the button
size
̶ to adjust the balance
̶ various alterations in the Setup-Program
̶ various alterations when embroidering
«Needle position»-buttons
⦁ press the left button
►
needle moves to the left
⦁ press the right button
►
needle moves to the right
⦁ keep button pressed
►
quick change
̶ total of 11 needle positions (5 left, 5 right,
1 center = 0)
Needle stop position up and «Quick reverse»-
button
If «Quick reverse»-button is pressed while sewing
or after stopping (e.g. zig-zag) with programmed
needle stop up, the sewing computer sews one
stitch forward before it switches to sewing in
reverse.
Needle stop position down and «Quick
reverse»-button
If «Quick reverse»-button is pressed after stopping
(e.g. zig-zag) with programmed needle stop
down, the sewing computer switches to sewing in
reverse immediately.
39