Security Program; Display; Selecting The Needle; Selecting The Stitch Plate - Bernina 880 Manual

Sewing preparation

Security Program

Needle Chart

32
⦁ touch the «Needle»- or «Stitch plate»-icon
►
«Needle-/Stitch plate overview»-Display appears

Display

►
yellow flag = recommended, optimal selection
►
green flag = optimal element is selected
If an inappropriate needle/stitch plate has been selected for the selected stitch
pattern, an animation will be displayed and the sewing computer cannot be
started.
The function remains active even when the sewing computer is turned off and
on.

Selecting the needle

⦁
touch the desired «Needle»-icon
►
stitch width is limited automatically
►
this prevents the inserted special needle (double needle etc.) from hitting
the presser foot or the stitch plate = no needle breakage
►
numbers in the needle icons indicate the needle distance in mm
⦁ touch the «Standard needle»-icon
►
Standard needle is activated again
►
the stitch width limitation is deactivated

Selecting the stitch plate

⦁ touch desired «Stitch plate»-icon
►
stitch width is limited automatically
►
this prevents the inserted needle from hitting the presser foot or the stitch
plate = no needle breakage

Saving

⦁
touch the «Close»-icon or «Needle»- or «Stitch plate»-icon
►
the settings are saved and the Display closes
⦁
press «Needle minder»-icon
►
«Needle index»-Display appears

Selecting needle

⦁ select attached needle and needle size
034791.51.04_2014-02_Manual_B880_EN