Fill Stitch Types; Changing Stitch Type; Altering Stitch Density - Bernina 880 Manual

Motifs

Fill stitch types

188
The embroidery motifs are filled with satin or step stitches.
Satin stitch
The needle moves left to right and vice versa.
Step stitch (Fill stitch)
The needle stitches in straight rows at regular intervals.
⦁
touch the «Change stitch type»-icon

Changing stitch type

The satin stitch fill changes to a maximum of 8 mm long step stitches fill (basic
setting).
►
touch the «+»/«-»-icon or turn stitch width knob to the left or to the right
►
maximum step stitch length is increased/decreased
The maximal step stitch length is 12.7 mm and the minimal length 0.5 mm.
⦁ touch to confirm
⦁ chosen step stitch length is saved and the «Edit»-Display appears
Back to basic settings
⦁ touch the yellow-framed icon
►
the basic setting (8 mm) is activated
Back to satin stitch
⦁
touch the «Change stitch type»-icon again
►
the motif is filled with satin stitches again

Altering stitch density

⦁
touch the «+»/«-»-icon or turn stitch length knob to the left or to the right
►
the stitch density is increased (more stitches)/decreased (less stitches)
The maximum stitch density is 300% and the minimum 25%.
⦁
touch to confirm
►
chosen stitch density is saved and «Edit»-Display appears
Back to basic settings
⦁ touch the yellow-framed icon
►
the basic setting (100%) of the motif is activated again
034791.51.04_2014-02_Manual_B880_EN