Balance
Balance
Practical and decorative stitches, alphabets
70
The sewing computer is tested and optimally set before it leaves the BERNINA
factory. Different fabrics, threads and stabilizers can affect programmed
stitches so that they are not sewn out properly. These effects can be corrected
with the electronic Balance so that the stitch formation can be adjusted where
necessary to suit the material.
⦁
touch the «i»-icon
⦁
touch the «Balance»-icon
Practical and decorative stitches
►
in the left part of the Display the stitch pattern is shown as it is set originally
(programmed)
►
in the right part of the Display any alterations are directly visible
Corrections
The stitch sewn on the fabric (e.g. the Honeycomb stitch) opens up and it does
not look correct:
⦁
adjust the stitch pattern length via the stitch length knob or «+»/«-»-icons,
until the stitch in the right part of the Display is identical with the stitch on
the fabric
►
the alteration is shown with a number in the yellow-framed icon
⦁
touch the «Close»- or «i»-icon
►
alterations are saved
►
the previous Display appears
Sideways-motion patterns
►
in the left part of the Display the stitch pattern is shown as it is originally
programmed
►
in the right part of the Display any alterations are directly visible
034791.51.04_2014-02_Manual_B880_EN