Overview Functions Alphabets
Pattern repeat
⦁
touch icon 1x
►
number 1 appears: the sewing computer stops at
the end of an individual stitch patttern or a stitch
pattern combination
⦁
touch icon 2-9x
►
numbers 2-9 appear: the sewing computer stops at
the end of an individual stitch patttern or a stitch
pattern combination after the number of repeats
selected
Font size in alphabets
⦁
select alphabet
►
font size is 9 mm
⦁
touch the icon
►
the small «A» is activated
►
the font size is reduced
Mirror Image left/right
The sewing computer sews the stitch pattern mirrored,
left/right referring to the sewing direction.
Mirror Image up/down
The sewing computer sews the stitch pattern mirrored
up/down referring to the sewing direction.
Altering the pattern length
⦁
move the slider in the Display using the
Touchscreen pen or the finger
►
pattern length (Standard = 100%) is infinitely
variable
⦁
extend or shorten in 1%-steps using the
«+»/«-»-icons or
⦁
touch the «+100%»-icon
►
the pattern length is extended in 100%-steps
Maximum length is 200%, shortest length is 10%.
⦁
⦁
⦁
Altering Alphabet
1 Pattern repeat
2 Font size in alphabets
1
2
3 Mirror Image left/right
4 Mirror Image up/down
3
4
5
5 Altering the pattern length
6 Multi-Directional sewing
6
7 Balance
8 Balance BERNINA Dual Transport
9 Permanent reverse sewing
7
8
10 Backstepping
11 Personal memory permanent
12 Reset
9
10
11
12
034791.51.04_2014-02_Manual_B880_EN
touch the «Alphabet»-button
select Alphabet
touch the «i»-icon
Multi-Directional sewing
⦁
use the stitch width knob to rotate the stitch pattern
or combination in 0.5°-steps, the stitch length knob
for 1°-steps or the «Direct-selection»-buttons for
rotating in 45°-steps into the desired direction
►
the sewing direction is shown in the left part of the
Display
►
the start is marked with a white dot and the end
with a red cross
►
the function only appears if the selected stitch can
be sewn in multiple directions
Balance
To balance forward and reverse stitches.
Balance BERNINA Dual Transport
Adjusting the feed of the upper fabric layer.
Permanent reverse sewing
The sewing computer sews the selected stitch pattern
in reverse.
Backstepping
The last 200 needle penetrations of a stitch pattern are
retraced, i.e. sewn backwards.
Personal memory permanent
⦁
select a stitch pattern and alter e.g. stitch length or
stitch width
⦁
touch the icon
►
the altered stitch pattern is saved
Reset
⦁
touch the icon
►
any alterations of the selected stitch pattern are
reset to basic setting
Functions - Display
47