Practical stitches
Zipper
82
Zipper foot No. 4D
Straight stitch No. 1
Preparation
⦁
close seam to the zipper beginning
⦁
sew securing stitches
⦁
baste seam closed and clean
⦁
finish the seam allowance
⦁
iron the seam
⦁
open the zipper
⦁
baste the zipper: baste or pin zipper in place so that fabric folded edges
meet over the center of the zipper
Sewing in the zipper
⦁
open zipper a little
⦁
move needle position to the right
⦁
start sewing from top left
⦁
position the foot so the needle stitches along the edge of the zipper coils
⦁
stop in front of the pull (needle position down)
⦁
raise the presser foot
⦁
close the zipper again
⦁
continue to sew, stop in front of the base of the zipper, needle position
down
⦁
raise the presser foot
⦁
turn the sewing project
⦁
sew across the seam, stop with needle position down
⦁
raise the presser foot
⦁
turn sewing project again
⦁
sew the second side from bottom to top
Variation: Sew both sides of zipper from bottom to top
Suitable for all fabrics with nap or grain (e.g. velvet).
⦁
prepare zipper as described above
⦁
start sewing in the center of the seam at the end of the zipper, needle
1
position on the right
⦁
sew diagonal along the edge of the zipper coils
⦁
first side 1 sew from bottom to top
2
⦁
move needle position to the left
⦁
second side 2 sew in the same way from bottom to top
Sew around the zipper pull
̶ sew up to about 5 cm away from the zipper pull
̶ stop with the needle down, raise the presser foot, open the
zipper, finsih sewing (use Free Hand System)
Starting to sew
̶ hold thread firmly when starting to sew = pull fabric slightly to the
back (fewer stitches) or
̶ sew about 1-2 cm reverse first, and continue to sew as usual
Zipper or fabric is thick or densely woven
For even stitch formation use a 90-100 needle.
034791.51.04_2014-02_Manual_B880_EN