Product Description - Buderus Logano plus GB312 Installation Manual

2.8

Product description

The Logano plus GB312 (
factory-fitted and ready-wired Logamatic BC10 basic pro-
grammer ( Fig. 2, page 10).
Fig. 1 Logano plus GB312 - main components
1 Programmer (MC10 and BC10)
2 Gas burner
3 Boiler front panel
4 Trap
5 Boiler heat exchanger with insulation
6 Burner control unit
7 Gas valve
8 Boiler outer jacket
9 B-kit with flow check valve (supplied as standard, not fac-
tory installed)
10 Gas isolating valve (supplied as standard, not factory
installed)
11 Mating flange, 2½" (included in B-kit, not factory installed)
12 Bolts, washers, Lock washers and nuts (to mount supply
manifold and mating flanges)
The main components of the Logano plus GB312
( Fig. 1) are:
– Programmer
– Frame and jacket
– Boiler heat exchanger with insulation
– Gas burner
– B-kit (standard B-kit comprising temperature/pressure
gauge, pressure relief valve, supply manifold, flow
check valve, mating flange for flow/return piping, not
factory installed)
– Gas isolating valve
The programming unit monitors and controls all electrical
boiler components.
The boiler heat exchanger transfers the heat generated by
the burner to the heating water. The thermal insulation
reduces radiant and standby heat loss.
Logano plus GB312 - Technical specifications are subject to change without prior notice
Fig. 1) is supplied with a fully
Details of the product
12
10
11
2
7 747 010 720-01.3RS
9