Buderus Logano plus GB312 Installation Manual page 10

2
Details of the product
1
Fig. 2 Logamatic BC10 basic programmer - controls
1 On/off switch
2 Dial for DHW set point
3 "DHW heating" LED
4 Status display screen
5 Control knob for maximum boiler temperature
6 "Heat demand" LED
7 Base plate with slot for a programming unit e.g. RC35
(behind the cover panel)
8 "Burner" LED (ON/OFF)
9 Socket for connecting diagnostic plug
10 "Status display" button
11 "Flue gas test" button
12 "Reset" button
Logamatic BC10 basic programmer (
amatic BC10 basic programmer enables basic operation
of the heating system. It provides functions such as the
following for that purpose:
– Turning the heating system on/off
– Setting the DHW temperature and the maximum boiler
temperature in heating mode
– Status display
On overall picture of the controls of the Logamatic BC10
basic programmer can be obtained from Fig. 2.
Many other functions for the convenient control of your
heating system are available with a programming unit
(such as the RC35*).
* Available separately
10
2 3 4 5
12 11 10 9 8
Fig. 2). The Log-
Logano plus GB312 - Technical specifications are subject to change without prior notice
6
7
7 747 010 720-85.1RS