Product Description; Intended Use; Certification And Testing Mark; Notes On Installation And Operation - Buderus Logano G115/3 WS Installation And Service Instructions Manual

2

Product description

This installation and maintenance manual contains important
information for the safe and intended installation, initial start-up and
maintenance of this boiler.
The special oil fired boiler Logano G115 WS is generally referred to
below as a boiler.
The installation and maintenance manual is provided for technicians
who have been trained and have experience in working with heating
systems and oil fired installations.
2.1

Intended use

The G115 WS is designed for central heating and domestic hot water
(DHW) systems, for instance in residential homes or apartment
buildings, or small commercial applications.
2.2

Certification and testing mark

This appliance has been tested and certified to meet rules and
regulations in place for the US and Canadian markets.
2.3

Notes on installation and operation

When installing and operating the heating system, it is the installer's
responsibility to meet all applicable federal, state, and local codes.
2.4

Heating system water quality

Poor water quality can damage heating systems due to scale formation
and corrosion.
Please refer to Chapter 2.8.6, Tab. 9 for further details of the water
quality.
CAUTION: Risk of system damage due to unsuitable
boiler water.
▶ If oxygen-permeable pipes are used, e.g. for radiant
heating systems, the systems must be separated
from the boiler by a heat exchanger. Unsuitable
heating system water promotes sludge formation
and corrosion. This can result in heating system
malfunction and boiler damage.
Logano G115 WS US/CA – 6 720 813 418 (2019/09)
2
Product description
5