Toshiba e-STUDIO2330C Service Manual page 912

Classific
Code
ation
3848 FAX Restriction on Address
Book destination setting
3849 FAX Restriction on destination
direct entry
3850 Scanner user authentication by
Remote Scan
3851 General Template display
3852 General Summer timeAutomatic
change function
3853 General Summer time
Offset value
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
SETTING MODE (08)
Setting mode (08)
Functi
Items
on
FAX
FAX
ALL
ALL
ALL
ALL
25 - 176
Default
<Accept
RAM Contents
able
value>
0 SYS Availability of
<0-1> destination selection
from the Address Book
is switched as one of
FAX mistransmission
prevention functions
when setting FAX
destinations.
0: OFF (Disabled)
1: ON (Enabled)
0 SYS Availability of direct
<0-1> entry is switched as one
of FAX mistransmission
prevention functions
when setting FAX
destinations.
0: OFF (Disabled)
1: ON (Enabled)
3 SYS Sets the user
<0-3> authentication with
remote scanning as
follows:
0: w/o GUI OFF,
w/ GUI OFF
1: w/o GUI ON,
w/ GUI OFF
2: w/o GUI OFF,
w/ GUI ON
3: w/o GUI ON,
w/ GUI ON
w/o GUI:
Remote scanning is
operated on SSOP
application of
eCOPY Inc.
w/ GUI:
Remote scanning is
operated on TTEC-
specific GUI.
This setting is only for
user authentication with
remote scanning. When
GUI is set ON, a dialog
for user ID and
password is displayed
at the start-up of remote
scanning. This code is
valid only when the
code 08-1482 is set "1
(Enabled)".
0 SYS 0: ID number order
<0-1> 1: Alphabetical order
0 SYS 0: Disabled
<0-1> 1: Enabled
0 SYS 0: +2:00
<0-7> 1: +1:30
2: +1:00
3: +0:30
4: -0:30
5: -1:00
6: -1:30
7: -2:00
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Proce
dure
1
1
1
1
1
1