Toshiba e-STUDIO2330C Service Manual page 1240

Page
21-10 Step (3) in the content of the disassembling procedure in "21.2.11 Board Case" has been
divided to steps (3) and (4).
The illustration in Fig. 21-25 has been corrected.
The illustration in Fig. 21-26 has been corrected.
21-12 The content of "Fig. 21-28" in "21.1.12 SRAM board<for LGC board>" has been divided to
"Fig. 21-29" and "Fig. 21-30".
A note and an illustration Fig. 21-31 have been added.
21-13 The illustration in Fig. 21-32 has been corrected.
The content of "Fig. 21-30" in "21.1.13 SRAM board<for SYS board>" has been divided to
"Fig. 21-33" and "Fig. 21-34".
21-14 A note and an illustration Fig. 21-35 have been added.
21-18 The illustration in Fig. 21-37 has been corrected.
21-20 A new procedure has been added in step (1) in "[E] Replace / Format HDD".
21-22 Descriptions in "21.2.4 Procedures and precautions when replacing the SYS board" has
been corrected.
21-23 A new procedure has been added in step (1) in "21.2.5 Procedures and settings when
replacing the SLG board".
21-24 The title "21.2.6 Procedures and settings when replacing SRAM (SYS board)" has been
corrected to "21.2.6 Procedures and settings when replacing SRAM board (for SYS
board)".
21-28 The title "21.2.7 Procedures and settings when replacing SRAM (LGC board)" has been
corrected to "21.2.7 Procedures and settings when replacing SRAM board (for LGC
board)".
21-28 A new note has been added in "21.2.7 Procedures and settings when replacing SRAM
board (for LGC board)".
21-28 The introductory part of "21.2.7 Procedures and settings when replacing SRAM board (for
LGC board)" has been corrected.
21-28 The illustration of Fig.21-40 has been corrected.
21-28 The procedure in "[A] Replace SRAM board" has been corrected.
21-30 Descriptions in "21.3 Precautions for Disposal of the HDD and PC Boards" have been
corrected.
23-17 A new clause 23.4 has been added.
24-1 The content of the Classification List in 24.1 has been changed.
24-9 Descriptions for the codes 98 and 99 have been corrected.
24-12 The default values for the codes 380-x have been changed.
24-16 The description in the "Items" field for the code 2411 has been corrected.
24-17 Descriptions about the e-STUDIO2330C have been added in the "Contents" field for the
codes 2900-x.
24-17 The default values for the codes 2900-x have been changed.
24-17 The descriptions in the "Items" field for the codes 2900-x have been corrected.
24-18 The descriptions in the "Items" field for the codes 2905-x have been corrected.
24-19 The descriptions in the "Items" field for the codes 2920-x have been corrected.
24-20 The descriptions in the "Items" field for the codes 2921-x have been corrected.
24-20 Descriptions about the e-STUDIO2330C have been added in the "Contents" field for the
codes 2924-x.
24-20 The default values for the codes 2924-x have been changed.
24-21 Descriptions about the e-STUDIO2330C have been added in the "Contents" field for the
codes 2925-x and 2926-x.
24-21 The default values for the codes 2925-x have been changed.
24-22 Descriptions about the e-STUDIO2330C have been added in the "Contents" field for the
codes 2927-x.
24-43 New codes 7808 and 7809 have been added.
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
REVISION RECORD
Ver.02 <2008.06.26>
Contents
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
10