(4)
Position the pins with the holes on the RADF
by moving it so that the pins fit into the holes
when the RADF is closed.
(5)
Tighten the left-hand hinge screw at the rear
side.
(6)
Loosen the hole position adjustment screws
on the right hand side.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 28-90
Fig. 28-91
Fig. 28-92
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
28 - 43
SETTING / ADJUSTMENT OF OPTION
28