Toshiba e-STUDIO2330C Service Manual page 1237

Ver.02
Page
- GENERAL PRECAUTIONS
The model name "e-STUDIO2330C" has been added.
1-1 1. FEATURE
The model name "e-STUDIO2330C" has been added.
2-2 2.1.1 General
The model name "e-STUDIO2330C" has been added.
2-4 2.1.2 Copy
The model name "e-STUDIO2330C" has been added.
2-4 2.1.2 Copy - [ 3 ] Copy speed (Copies/min.)
The copy speed of the e-STUDIO2330C has been added.
2-7 2.1.2 Copy - [ 4 ] System copy speed
The system copy speed of the e-STUDIO2330C has been added.
3-16 3.2 Electric Parts Layout - [J] PC board, power supply
SW9 (Damp heater switch) has been added.
3-22 3.3 Symbols and Functions of Various Components
SW9 (damp heater switch) has been added.
4-3 4.2 Description of Operation
The model name "e-STUDIO2330C" has been added.
4-13 4.4 Comparison with e-STUDIO2500C/3500C/3510C
The model name "e-STUDIO2330C" has been added.
5-5 A timing chart for the e-STUDIO2330C is to be added.
5-7 A timing chart for the e-STUDIO2330C is to be added.
6-18 Step (6) in the disassembling procedure in "6.5.4 DSP board" has been corrected.
The illustration in Fig.6-20 has been corrected.
8-21 "PFP upper drawer" has been changed to "3rd drawer".
"PFP lower drawer" has been changed to "4th drawer".
8-25 "[C] Reproduction ratio of secondary scanning direction (Fine adjustment of transfer belt
motor rotation speed)" has been corrected.
8-26 "PFP upper drawer" has been changed to "3rd drawer".
8-27 "PFP lower drawer" has been changed to "4th drawer".
8-37 "SRAM board(LGC board)" has been changed to "SRAM board(LGC board, SYS board)".
8-39 The description of the note in "8.6.2 Density adjustment" has been changed.
8-42 "ACS/Black text/Photo" has been changed to "ACS/Black/Text/Photo".
"ACS/Black text" has been changed to "ACS/Black/Text".
"ACS/Black Photo" has been changed to "ACS/Black/Photo".
8-43 The content of the "Remarks" field in the table in "8.6.5 Background adjustment" has been
changed.
8-44 The codes 7808 and 7809 have been added in the table in "8.6.7 Sharpness adjustment".
8-45 The content of the "Remarks" field in the table in "8.6.8 Setting range correction" has been
changed.
8-51 The note in "8.6.17 Black header density level adjustment" has been deleted.
Descriptions for the codes in "8.6.19 Judgment threshold adjustment for blank originals"
have been corrected.
8-53 "SRAM board(LGC board)" has been changed to "SRAM board(LGC board, SYS board)"
8-58 "8.7.4 Adjustment of smudged/faint text" has been changed to "8.7.4 Adjustment of faint
text".
Descriptions for the codes in "8.7.4 Adjustment of faint text" have been changed.
8-62 Descriptions for the codes in "8.7.14 Sharpness adjustment" have been corrected.
The default value has been added in the "Remarks" field in the table in "8.7.15 Offsetting
adjustment for background processing".
An operational procedure has been added in "8.7.15 Offsetting adjustment for back-
ground".
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Ver.02 <2008.06.26>
Contents
7
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
REVISION RECORD